Specifications

Graphic Operation Terminal GOT-F900 Introduction 1
1-15
F940GOT and F943GOT (including Handy GOT)
Version Description
V1.00 • First version
V1.10
• Compatible with QnA Series (A Series mode)
• Compatible with GT Designer.
V2.00
• Compatible with SLC500 Series manufactured by Allen-Bradley Co., Inc.
• Addition of function of bar code connection
V3.00
• Addition of function, connecting to QnA Series PLC
• Addition of hard-copy function
• Addition of setting of key window initial display position
• Addition of key code for alarm history
V3.10
• Addition of observe status function
• Compatible with customizing of key window
• Touch key and lamp graphic extension
• Addition of rectangle and circle daubing pattern
V4.00
• Addition of function, connecting to FX
1S
and FX
1N
Series PLC
V4.10 • Addition of function, connecting to Q Series PLC
V5.00
• Addition of function, connecting to S7-300/400 Series manufactured by Siemens AG
• Addition of function, connecting to machine controller manufactured by YASKAWA
Electric Corporation
V6.00
• Addition of function, connecting to MicroLogix 1000/1200/1500 Series manufactured
by Allen-Bradley Co., Inc.
• Addition of function, connecting to CS1 Series (CS1G/H-CPU
!!
-V1) manufactured
by OMRON Corporation
(Connection condition: Link connection)
• Addition of function, entering numeric values including decimal points
• Addition of security function (screen protection)
V6.20
• Addition of function, connecting to MELSEC positioning units FX-10/20GM, FX
2N
-10/
20GM, E-20GM
• Addition of function, connecting to inverter FREQROL-A500, E500 and S500 Series
• Addition of function, connecting to FP0 and FP2SH Series manufactured by
Matsushita Electric Works
• Addition of function, connecting to S7-200 Series manufactured by Siemens AG
• Addition of function, displaying alarms in alarm list in order of occurrence
• Addition of function, high-definition font display
• Addition of function, "6dots
×
8dots" font display
V6.30
• Addition of function, connecting to Q00JCPU, Q00CPU and Q01CPU
• Addition of function, connecting to Q multi-CPU system (Q02CPU, Q02HCPU,
Q06HCPU, Q12HCPU and Q25HCPU)
• Addition of function, uploading recipe data by screen creation software
• Addition of instructions, in HPP mode (FNC156 ABS, FNC169 HOUR, FNC176 RD3A,
FNC177 WR3A and FNC180 EXTR)
• Addition of FX
2N
-8AD and FX
2N
-2LC buffer memory access
V6.40
• Addition of function, buzzer sounds by GOT bit device (GB)
• Change in ON/OFF process for bit devices, when connecting to PLCs manufactured
by OMRON Corporation
V6.50
• The key code (FFFE) to mute the buzzer sound of touch keys is added.
• Communication commands available while the microcomputer board is connected are
added:
Command to write two or more points in the unit of bit
Command to fill the internal data (D, M)