Specifications

Creation of Display Screen (GT Designer) 20
20-1
20. Creation of Display Screen (GT Designer)
20.1 Project auxiliary settings
In the case of GT Designer, when the software is opened, a "Project Auxiliary Settings" screen
is displayed after select project “New” - "GOT/PLC Type" Setting.
The "Project Auxiliary Settings" screen can be also displayed selecting "Common" - "Auxiliary
Setting" - "Project" on the menu.
This setting can be also made using "SET-UP MODE" of the GOT (except dedicated setting
item for F930GOT, F933GOT and F940WGOT).
On the "Project Auxiliary Settings" screen, make common settings for all the screens to create.
Items written by the screen creation software are stored in the program memory and items set
on GOT are written to the built-in RAM. If both "setting by the screen creation software" and
"setting on the GOT" are performed, the GOT operates in accordance with the items set later.
If the battery becomes low or the RAM fails, the GOT operates in accordance with the items
set by the screen creation software.
When screen data is read from the GOT by the screen creation software, the items written by
the screen creation software are displayed.
This section describes the elements constructing user screens created using GT Designer.
Graphic Operation Terminal GOT-F900