Specifications

Graphic Operation Terminal GOT-F900 Changeover of Display Screen (FX-PCS-DU/WIN-E) 19
19-18
- Setting for individual screen
• Screen No. 0 is created, and the "Change Screen"
object is set as follows.
Indivisual Screen
• It is set so that screen No. 1 is displayed by a data
register (word device) in the PLC.
The initial value of the data register for screen
changeover is D0.
Indivisual Screen
If "Bit Device" is not specified, both "Control
Input" and "Bit Device" are not specified.
Accordingly, the screen is changed over
immediately by a data register in the PLC.
For the condition to make screen changeover by
data register effective, enter "Control Input" or
"Bit Device" as shown in the program example 1
on the next page.
Continued in sequence program examples on the next page.
Condition
Screen No.
(Direct)
Save Current
Screen
Control
Input
Bit Device
1
Touch key
No. 0
Not
specified
1 Not effective
2
Touch key
No. 1
Not
specified
2 Not effective
Condition
Screen No.
(Direct)
Save Current
Screen
Control
Input
Bit Device
1
Not specified M100
PLC data
register
Not effective
"ST. 1" ke
y
When a sequence pro
g
ram is executed,
screen No. 10 or 20 is displa
y
ed.
Screen No. 0
MONITOR
MONITOR
* MENU *
To screen
No. 2
Screen No. 1
PROCESSING
When the MENU ke
y
is pressed, screen
No. 0 is displa
y
ed.
"ST. 2" ke
y
ST. 1
ST. 2
"STATION 1" KEY MONITOR