Specifications

Graphic Operation Terminal GOT-F900 Changeover of Display Screen (FX-PCS-DU/WIN-E) 19
19-15
Example of screen changeover by screen number stored in memory:
An example of screen changeover by screen stored in memory is shown below.
In the example below, an abnormality occurs in the machine in the operation mode, an error
message is displayed, then the previous screen is displayed.
Use the screen number storage function when one screen has been specified among two or
more screens, and the screen that was displayed prior to the screen changeover is to be
displayed again.
* MONITOR *
MENU
"CYCLE
OPERATION" ke
y
Screen No. 0
ONE CYCLE DRIVEN
Screen No. 1
*Screen No. is not stored.
)
The mode can be selected on the mode selection screen shown on
the left.
When the "CYCLE OPERATION" or "CONTINUOUS OPERATION"
key is pressed, a corresponding screen is displayed.
Control Input Bit Device
Touch ke
y
No. 0 Not specified
Not specified
Condition
Screen No.
(
Direct
)
Save Current
Screen
1
2
Not effective
Not effective
Screen chan
g
eover settin
g
for individual screen
Touch ke
y
No. 1
"CONTINUOUS
OPERATION" ke
y
*Screen No. is not stored.
CONTINUOUSLY DRIVEN
When the " " ke
y
is
pressed, screen No.
0 is displa
y
ed.
1
2
Control
Input
Bit Device
Touch ke
y
No. 0
Not specified
M10
(
Active when:
On = a
contact
)
Condition
Screen No.
(
Direct
)
Save
Current
Screen
0
10
Not effective
Effective
[ Screen chan
g
eover ]
Not
specified
2
Control
Input
Bit Device
Condition
Screen No.
(
Direct
)
Save
Current
Screen
[ Screen chan
g
eover ]
At this time, the screen No. is stored in the screen No. stora
g
e
memor
y
inside the GOT.
ERROR
Screen No. 10
MOTOR CHECK
" "
1
2
Control
Input
Bit Device
Touch ke
y
No. 0
Not
specified
Not
specified
Condition
Screen No.
(
Direct
)
Save Current
Screen
DU memor
y
0
Not effective
Not effective
Touch ke
y
No. 1
)
When bit device M0 in the PLC becomes ON, the
screen is changed over.
The screen stored in
the screen No. stora
g
e
memor
y
is displa
y
ed.
To screen No. 1 or 2
(
which is stored in
the memor
y)
Touch ke
y
No. 0
When M10 in the PLC becomes ON, the screen is chan
g
ed
over.
To screen
No. 0
)
Check the contents, and return to the previous screen.
Touch ke
y
No. 1
Screen No. 2
When the " " ke
y
is
pressed, screen No. 0
is displa
y
ed.
1
2
CYCLE
OPERATION
CONTI NUOUS
OPERATION
M10
(
Active when:
On = a
contact
)
10 Effective
Not
specified
1
Touch ke
y
No. 0
Not specified 0 Not effective