Specifications

Graphic Operation Terminal GOT-F900 Changeover of Display Screen (FX-PCS-DU/WIN-E) 19
19-12
19.5.2 Screen changeover by data register
The display screen can be changed by specifying the screen number using a word device
(Only data registers are available.) in the PLC.
Set item Description
Control Input
Bit Device
Do not enter any touch key or bit device.
Destination
Screen: PLC
data register
Specify a desired screen number using a data register (control word device) for
screen specification in the PLC.
The data register can be set using the screen creation software. The initial value is
D0.
When the data in the register is changed, screen changeover is performed and the
specified screen is displayed.