Specifications

Graphic Operation Terminal GOT-F900 Changeover of Display Screen (FX-PCS-DU/WIN-E) 19
19-9
19.4 Screen changeover using function keys
This paragraph explains screen changeover using the function keys (in the F920GOT-K and
the F930GOT-K).
In screen changeover using the function keys, the screen is changed over in accordance with
the contents of the changeover destination when the key input turns ON. Select the external
key No., display the "Change Screen" dialog box, then set each item.
In order to display the screen of a fixed No. by pressing a function key, perform the following
settings.
Set the "Change Screen" object using a function key as an external key by selecting "Keys"
→
"External Key" in the screen creation software.
The "Change Screen" object can be set for all screens as the common setting or for individual
screens.
In the F920GOT-K, the function keys are assigned as "External key 0", "External key 1", ...
"External key 5" from the left.
In the F930GOT-K, the function keys are assigned as "External key 0", "External key 1",
"External key 2" and "External key 3" from the left to the right in the upper row, and as
"External key 4", "External key 5", "External key 6" and "External key 7" from the left in the
lower row.
Set item Description
Bit Device
Make "Bit Device" effective with a check mark, and enter a desired bit device (X, Y,
M, S, T or C).
In "Active when", select "On" (a contact) or "Off" (b contact).
Screen No.
Enter the number of a screen to be displayed next among user screens (No. 0 to
499) and system screens (No. 1000 to 1030).