Specifications

Graphic Operation Terminal GOT-F900 Changeover of Display Screen (FX-PCS-DU/WIN-E) 19
19-6
19.3 Screen changeover by touch key
This section describes screen changeover using a touch key.
(The F920GOT-K is not equipped with a touch key.)
When a touch key is used for screen changeover, the screen display is changed over to the
specified destination when the touch key becomes ON. Enter an arbitrary touch key to "Control
Input" in "Condition". Select "Direct" in "Destination Screen", and enter a desired screen
number to "Screen No."
Specify a number for "Screen No." so that a fixed screen is displayed when a touch key is
pressed.
Set item Description
Control Input
(in GOT)
Available touch keys
Common setting for all screens: Touch keys No. 50 to 99
Setting for individual screen: Touch keys No. 0 to 49
Bit Device
Do not select "Bit Device". (Do not enter any bit device No.)
Screen No.
Enter the number of a screen to be displayed next among user screens No. 0 to
499 and system screens No. 1001 to 1030.
50 keys in total