Specifications

Graphic Operation Terminal GOT-F900 Introduction 1
1-8
DANGER
• Do not edit the PLC program simultaneously using multiple peripheral equipment
(programming tool and GOT).
Otherwise, the PLC may produce improper operating signals or the program may be
damaged.
CAUTION
• When concurrently using multiple peripheral equipment (programming tool and GOT),
edit the PLC program using individual tools. The edited PLC program must be displayed
or read out from the unit unused for editing. If the PLC program is carelessly edited using
multiple peripheral equipment, thus, PLC and each unit has differing programs, the PLC
may execute unintended operations when program or set values for timer/counters is
changed next time.
• A CPU connection with the A, QnA, or Q Series PLC allows for sequence programs to be
transferred and monitored using the FX-PCS/WIN-E or GX Developer software connected
with a personal computer (2-port interface function).
When communicating with a QnA or Q series PLC the 2-port interface function can be used
when the GOT is set for CPU connection.
(The 2-port interface function is valid in the GOT920GOT-K-E only for CPU connection with
the FX Series PLC. This function cannot be used in any GOT when connected to a PLC
manufactured by other companies.)
When using the GOT and peripheral devices dedicated to sequence program editing (such
as FX-20P and A6GPP that performs RS-422 communication) for the one PLC, connect the
GOT to an extension communication board or extension communication adapter for the FX
Series, a computer link unit of A Series or a communication unit for the QnA Series or Q
Series.