Specifications

Graphic Operation Terminal GOT-F900 Introduction 1
1-6
1.3 Expressions and basic functions of operation keys
The operation keys are expressed as follows in the text.
The examples of the screen display and key operation are described using the F940GOT if not
specified.
1.3.1 Expressions of operation keys
1) Touch keys on the screen which are actuated when being touched by fingers are enclosed
with a frame.
2) Cursor control keys to be pressed may be expressed as follows.
3) When a same key is pressed several times or a same operation is repeated, the following
expression may be used.
4) When an arbitrary numeric within the range of 0 to 9 is to be entered, the following
expression may be used.
1.3.2 Basic operations
The common operations in the GOT are shown below.
a) Function display
The selected mode or function is displayed here.
b) END key
This key terminates the displayed function, and
returns to the previous screen.
c) CLR (clear) key
This key cancels the input of characters and
numeric values.
d) ENT (enter) key
This key determines the input of alphabets and
numerics.
e) Ten-key keypad
This keypad allows to enter numerics.
f) - (minus) key
g) and (cursor control) keys
h) Touch key for item setting
Displays a set item or keyboard for numeric input
in accordance with the contents of display.
USER SCREEN MODE
,
PROGRAM LIST
, ,
MORE,
0 to 9
[ SET CONDITION ] END
SAMPLE COND.
END COND.
5
0
6
1234
789 - CLR
ENT
START COND.
a)
h)
e) f) g)
c)
d)
b)