Specifications

Graphic Operation Terminal GOT-F900 Observe Status Function 16
16-3
16.4 Setting the triggers
Set the triggers to be monitored.
Up to two bit devices can be set.
• Trigger 1: Set ON or OFF of a bit device.
• Trigger 2: Set ON or OFF of a bit device.
- When trigger 1 and trigger 2 are set, the GOT performs the operation described in the
next section only when both triggers are initiated.
- Make sure to set trigger 1. Set trigger 2 if necessary.
Example: Trigger 1: "ON" is set.
Trigger 2: "OFF" is set.
Both triggers are initiated.
ON
OFF
ON
OFF