Specifications

Graphic Operation Terminal GOT-F900 Observe Status Function 16
16-2
16.2 Applicable version
GOT
Screen creation software
16.3 Observe cycle
Set the cycle at which the GOT monitors whether the specified triggers are initiated.
Select "Ordirary" or "Sampling".
• Always:
Every time communication is performed between the GOT and the PLC, the GOT monitors
whether the specified triggers are initiated. (every 200 to 300 ms.)
• Sampling: The cycle can be set from 1 to 60 seconds with an increment of 1 second.
At the set cycle, the GOT monitors whether the specified triggers are initiated.
When using the F920GOT-K, the monitor interval greatly changes according to the processing
situation (such as the alarm or observe status function).
The pulse change may not be caught if there are many tasks and the pulse interval of the
condition devices is short. In order to catch the pulse change, make sure to maintain the ON/
OFF status of the condition device for a sufficient length of time.
Model name Version
F920GOT-K From first product
F930GOT-K From first product
F930GOT, F933GOT V2.00 or later
F940GOT, F943GOT V3.10 or later
F940WGOT V1.00 or later
Software Applicable version
GT Designer SW1D5C-GOTR-PACKE(C) or later
FX-PCS-DU/WIN-E V2.50 or later