Specifications

Graphic Operation Terminal GOT-F900 Screen Hard Copy Function 14
14-2
14.2 Applicable version
GOT
To use this additional function, the following versions of the screen creation software are
required.
Screen creation software
14.3 Starting and aborting printing
14.3.1 Start and abortion by triggers
Printing start/abort command is given when a corresponding bit device in the PLC specified in
the screen creation software turns ON. The GOT monitors in a constant cycle whether these
bit devices have turned ON (monitoring cycle).
The monitoring cycle can be set in the unit of 1 second within the range from 1 to 60 seconds.
* If the bit device ON period is shorter than the monitoring cycle, it may not be recognized as
a trigger. Make sure that the ON period is longer than the monitoring cycle.
(Refer to program example shown in 16.3.3.)
14.3.2 Start and abortion by touch keys
Printing can be started and aborted by pressing touch keys.
Assign the following key codes to the touch keys.
Product model name Version
F920GOT-K Not possible to use
F930GOT-K Not possible to use
F930GOT, F933GOT Not possible to use
F940GOT, F943GOT V2.00 or later
F940WGOT V1.00 or later
Software name Applicable version
GT Designer SW1D5C-GOTR-PACKE(H) or later
FX-PCS-DU/WIN-E V2.00 or later
Start Abort
Key code
FF17 FF18