Specifications

Connection to Bar Code Reader 13
13-1
13. Connection to Bar Code Reader
13.1 Outline of function
ASCII code data sent from a bar code reader can be stored in the word devices in the PLC via
the GOT. (The F920GOT-K cannot be connected to a bar code reader.)
13.2 Applicable version
GOT
To use this additional function, the following versions of the screen creation software are
required.
Screen creation software
* If the connected PLC is set for RS-232C, the GOT cannot be connected to a bar code
reader. (Does not apply to F933GOT, F943GOT and F940WGOT.)
While screen data is being transferred from a PC or during printing, communication with a
bar code reader cannot be performed, as the same RS-232C port is used.
13.3 Connection
Use the RS-232C port of the GOT for connection with a bar code reader.
For wiring between the GOT and a bar code reader, refer to "GOT-F9000 SERIES
HARDWARE MANUAL" and the instruction manual of the bar code reader.
Product model name Version
F930GOT, F933GOT V2.00 or later
F930GOT-K From first product
F940GOT, F943GOT V2.00 or later
F940WGOT V1.00 or later
Software name Applicable version
GT Designer SW1D5C-GOTR-PACKE(H) or later
FX-PCS-DU/WIN-E V2.00 or later
Graphic Operation Terminal GOT-F900