Specifications

Graphic Operation Terminal GOT-F900 Test MODE 11
11-3
11.3 DATA BANK
Data files created using the screen creation software can be edited.
By selecting the test mode and "DATA BANK" on the screen, data saved in data files can be
changed.
The amount of data and the number of files can be set using the screen creation software. The
function described here is available only to change the data saved in data files. (When using
the F920GOT-K, F930GOT-K, F930GOT and F933GOT, data files can be used but cannot be
edited on the GOT screen)
*
**
*
Basic operation
#
##
#
Important point
Transfer from a personal computer
When the complete screen data is read from the personal computer, a data file containing the
Recipe, Alarm Conditions, Sampling Conditions, and System Settings is transferred to the
GOT along with the screen data.
The data file Read/Write characteristics vary per the GOT version as listed below.
• Changes made to the data file in the GOT cannot be read from the GOT.
- F930GOT or F933GOT: earlier than Version 4.30; F940GOT or F943GOT: earlier than
Version 6.30; F940WGOT: earlier than Version 1.30
• Changes made to the data file in the GOT can be read from the GOT.
- F930GOT or F933GOT: Version 4.30 or later; F920GOT-K or F930GOT-K: from the first
product; F940GOT or F943GOT: Version 6.30 or later; F940WGOT: Version 1.30 or later
BANK NUMBER=7/BANK TOTAL=10
SET
[ DATA BANK SCREEN ] END
D 0[ 10]
[ DATA BANK SCREEN ]
c)
BANK
a)
b)
D 1[ 20]
D 2[ 30]
D 3[ 40]
D 4[ 50]
D 5[ 60]
D 6[ 70]
D 7[ 80]
D 8[ 90]
: Move the cursor. : Scroll the display by 14 files.
TEST MODE screen
is displayed.
DATA BANK screen
is displayed.
DATA BANK
Section 5.3
Select "DATA BANK".
The screen shown
below is displayed.
BANK Allows to specify a file No. The screen No. currently edited is displayed on the screen.
Displays the keyboard and allows to change the data indicated by the cursor.
SET
:
:
a) Cursor
b) SET
Designates the data to be edited.
c) BANK
Allows selection of a file to be edited.