Specifications

Test MODE 11
11-1
11. Test MODE
This chapter describes the test mode in which the user screen list can be displayed, data files
can be edited, and debugging can be performed to confirm key operations.
11.1 Outline of test mode
*
**
*
Basic operation
a) USER SCREEN
The list of user screens displayed in screen mode
can be displayed.
b) DATA BANK
Data files created using the screen creation
software can be changed. (Not available when
using the F930GOT and F933GOT)
c) DEBUG
Touch key operations and screen changeover
operations can be checked. (Not available when
using the F930GOT and F933GOT)
d) Communication monitor
The condition of communication with the connected
PLC can be checked. (Not available when using the
F930GOT and F933GOT)
SELECT MODE
screen is displayed.
TEST MODE screen
is displayed.
TEST MODE
Section 5.3
Select "TEST MODE".
The screen shown
below is displayed.
[ TEST MODE ] END
USER SCREEN
DATA BANK
DEBUG
a)
b)
c)
[ TEST MODE ]
COMMUNICATION MONITOR d)
Graphic Operation Terminal GOT-F900