Specifications

Graphic Operation Terminal GOT-F900 Alarm MODE 10
10-3
10.2.1 Set item
1) Window display (comment window display)
• In FX-PCS-DU/WIN-E
If "window display" is selected as the alarm notification method, when an alarm device
turns ON, an alarm message corresponding to that device is displayed on the user
screen.
- Using the screen creation software, alarm messages can be created and alarm display
positions can be selected from upper, medium and lower.
In the F920GOT-K, the 'upper, medium and lower' setting is invalid.
- An alarm message can be displayed in up to 20 characters.
- When two or more alarm devices have turned ON, the alarm messages can be scrolled
using the message scroll keys. (As for the F920GOT-K, refer to Section 10.2.2.)
When two or more errors have occurred in the system, the error messages are displayed
in the same way.
When alarm devices have turned OFF, the window is closed.
- This window is displayed in screen mode (while a user screen is displayed).
When the display is changed to a system screen (alarm mode), the window disappears.
However, if an alarm device is ON, the window is displayed again when the display is
changed to a user screen again.
• In GT Designer
By setting "Detail Display Destination" in "Basic Setting" in "Alarm History Common
Setting" in the software to "Comment Window", detailed comment messages
corresponding to alarm devices can be displayed.
In this case, the object "Alarm History" or "Alarm List" is displayed on the user screen,
and detailed comment messages are displayed when a key whose key code has been
set to "FFB8 (detail display)" is pressed. (As for the F920GOT-K, refer to Section 10.2.2.)
Alarm history display : Refer to Section 21.6.2.
Alarm list display : Refer to Section 21.6.3.
Message
scroll key
Upper
Medium
Lower