Specifications

Graphic Operation Terminal GOT-F900 Sampling MODE 9
9-7
9.2.3 END COND.
Set the timing at which sampling finishes. When the end condition is satisfied, sampling
finishes.
• Sampling end by occurrence
Sampling is finished after the specified number of times (2,000 times maximum).
• Sampling end by time
Sampling is continued until the specified time. However, when data on more than 2,000
times has been acquired, the data acquired so far is deleted, oldest first and new data is
saved (that is, the sampling data is shifted).
• Sampling end by trigger
Sampling is finished when the specified device No. becomes ON or OFF. However, when
data on more than 2,000 times has been acquired, the data acquired so far is deleted oldest
first and new data is saved.
*
**
*
Basic operation
TIME
SET
END COND.
Select "END
COND".
SET CONDITION
screen is displayed.
NUMBER
Select "NUMBER".
Screen 1 is
displayed.
Select "TIME".
Screen 2 is
displayed.
1) Sampling end by
occurence
2) Sampling start
by time
3)
1)
Display the
device input
keyboard.
Device symbol
Device No. ENT OFF -> ON
Execute
the input.
Change over
"OFF ON" and
"ON
+
OFF".
Select a bit device from X, Y, M, S, T or C.
SET
Display the
ten-key pad.
0 to 9
Enter the number of
times.
ENT
They are changed over alternately.
DEVICE
Select "DEVICE".
Screen 3 is
displayed.
3) Sampling end
by trigger
2)
SET
Display the
ten-key pad.
0 to 9
Set date, hour, minute and
second.Set date, hour,
minute and second.
ENT
(
(