Specifications

Sampling MODE 9
9-1
9. Sampling MODE
This chapter describes the sampling mode in which the contents of continually changing data
registers are acquired at a constant time interval (in a constant cycle) or, in the ON/OFF
condition (trigger) of bit devices.
The acquired data can be displayed in graph or list format.
The acquired data can be printed in the ’Other mode’ of the GOT or using the user screen
creation software. The sampling mode can be used to manage data on the operation rate of
machines and the production status.
F920GOT-K, F930GOT-K, F930GOT and F933GOT has no sampling mode.
9.1 Outline of sampling mode
The contents of the specified 4 data registers (16 bits) are acquired in a constant cycle or by a
trigger condition. The data in up to 2,000 registers can be acquired in a constant cycle, by the
trigger condition.
*
**
*
Basic operation
• When "SAMPLING MODE" is selected, the screen
shown on the left is displayed. On this screen, the
sampling condition can be set, the results displayed,
and the acquired data cleared.
a)SET CONDITION (Section 9.2)
Data registers to be sampled, the sampling timing
(trigger or constant cycle), the sampling start and end
times can be set.
b)DISPLAY LIST (Section 9.3)
The sampling time (hour, minute and second) and
sampling result are displayed in the form of list.
c) DISPLAY GRAPH (Section 9.3)
The sampling result is displayed in the form of trend
graph.
d)CLEAR DATA (Section 9.4)
All of the data acquired by sampling is cleared.
SELECT MODE
screen
SAMPLING MODE
screen
SAMPLING MODE
Section 5.3
Select "SAMPLING
MODE" .
The screen shown
below is displayed.
[ SAMPLING MODE ]
END
SET CONDITION
CLEAR DATA
DISPLAY LIST
DISPLAY GRAPH
a)
b)
c)
d)
Graphic Operation Terminal GOT-F900