Specifications

Graphic Operation Terminal GOT-F900 HPP Mode 8
8-19
8.4.3 Forced ON/OFF
Bit devices (Y, M and S) and word devices (T and C) can be forced ON/OFF. When T, C, D, V
or Z is forced OFF, its current value is reset to "0".
*
**
*
Basic operation
Operation example
Forced ON/OFF of output Y0 and auxiliary relay M0 by operating a touch key (Excluding the
F920GOT-K)
#
##
#
Important point
• Caution on connecting the SYSMAC C Series manufactured by OMRON
Using a forced set/reset by peripheral equipment in the SYSMAC C Series PLC locks the
PLC bit devices into their current state. This state cannot be changed by the PLC program.
In the above described situation, using the USER SCREEN MODE or forced ON/OFF
function in HPP MODE in the GOT will have the following consequences.
1) If a bit device is turned ON/OFF in the GOT, all the bit devices are released to change
state by the PLC program. (GOT uses the KC command)
F930GOT or F933GOT: prior to Version 4.40; F940GOT or F943GOT: prior to Version
6.40; F940WGOT: prior to Version 1.40
2) Only the device turned ON/OFF in the GOT is released to change state by the PLC
program. (GOT uses the FK command)
F930GOT or F933GOT: Version 4.40 or later; F930GOT-K: From first product,
F940GOT or F943GOT: Version 6.40 or later; F940WGOT: Version 1.40 or later
[Operation by touch key]
Y/M/S/T/C/D/V/Z
monitor displa
y
,
Move the cursor to a
device to be forced
ON/OFF.
ON
OFF
ON
OFF
[Operation in F920GOT-K]
Y/M/S/T/C/D/V/Z
monitor displa
y
,
Displ a
y
the device to
be forced ON/OFF.
1
0
ON
OFF
Displ a
y
Y0/M0
monitor usin
g
the
procedure described.
ON OFF
ON
Displ a
y
screen 1.
OFF
ON
ON
Displ a
y
screen 2.
Move the
cursor to
M0.
Move the
cursor to
Y0.
OFF
OFFMove the
cursor to
M0.
Displ a
y
screen 1.
DEVI CE ON OFF
SET COMMENT
Y 000 M 0
Displ a
y
screen 2.
DEVI CE ON OFF
SET COMMENT
Y 000 M 0