Specifications

Graphic Operation Terminal GOT-F900 HPP Mode 8
8-16
8.4.1 Device/comment monitor
Symbols such as X, Y comments can be displayed for monitoring. Comments can be created
using the screen creation software FX-PCS-DU/WIN-E.
(Available only in the F940GOT, F943GOT, and F940WGOT)
Operation example
Monitor the ON/OFF status of inputs X000 and X001, and the current value and set value of
timer T3
#
##
#
Important point
1) Monitor function when timers and counters are indirectly specified
If a data register is used for the set value of a timer/counter as
shown in the program on the left, the contents of the data register
are used when monitoring is performed.
When the set value is changed (as described on the next page),
the contents of the data register is overwritten.
Displ a
y
screen 1
X 000
T 3
X 001
CUR
SET
[ 1234]
[ 2345]
RST( )
Displ a
y
screen 2
SW1
TIM
SW2
CUR
SET
[ 1234]
[ 2345]
RST( )
ON status
The ON/OFF status of each monitored
device is indicated as follows.
OFF status
HPP MODE
screen is
displa
y
ed.
DEVICE MONITOR
Select "DEVICE
MONITOR" on the
screen.
DEVICE
Enter a device
s
y
mbol "X".
X
ENT
Select
"X0".
0
Displ a
y
"X0"
on the screen.
DEVICE
Enter a device
s
y
mbol "T".
T 3
Select
"T3".
ENT
Displ a
y
screen 1.
COMMENT
Displ a
y
the
screen 2.
When a comment has been entered to a device,
looth are displa
y
ed to
g
ether.
When a comment has not been entered to a device,
the device is displa
y
ed with the s
y
mbol.
This comment displa
y
function is valid onl
y
when
comments have been created usin
g
the screen
creation software FX-PCS-DU/WIN-E.
Displ a
y
"X1" on
the screen.
Section 5.3
D5
D6
T10
C10