Specifications

Graphic Operation Terminal GOT-F900 HPP Mode 8
8-14
8.4 DEVICE MONITOR
The ON/OFF status and set value/current value of arbitrary devices in the PLC can be
monitored. In addition, the ON/OFF status can be forced ON/OFF and the set values/current
values can be changed.
• When "DEVICE MONITOR" is selected on the HPP MODE
screen, the DEVICE MONITOR screen shown on the left is
displayed.
(In the F920GOT-K, DEVICE MONITOR is displayed when
HPP MODE is selected.)
Function keys are provided at the bottom of the screen.
Each function key is actuated when touched.
(Touch keys are not displayed on the F920GOT-K.)
- DEVICE : Allows to specify a device No. to be
monitored.
- ON/OFF : Turns ON/OFF the specified device.
- SET : Executes change of the current value/set
value.
- COMMENT:Changes the monitor display.
• When using the F920GOT-K, operate the key-pad as
follows:
- Press the DEV key to start entering the device to monitor.
- Press the
"
/
#
key to select a device symbol.
- Press the 0 to 9 keys to enter device numbers, current
and set value.
- Press the ENT key to set the device monitor.
- Press the
"
/
#
key to increase/decrease the displayed
device monitor number.
- Press the ESC key to cancel an input device or to exit
DEVICE MONITOR.
- Press the SET key while the arbitrary word device is being
displayed to start changing the current/set value.
- Press the 0 key while the arbitrary bit device, timer, or
counter is being displayed to execute the forced OFF.
Press 1 to execute the forced ON.
[ DEVICE MONITOR ] END
[ DEVICE MONITOR ]
DEVICE ON OFF
SET
COMMENT
DEC/ HEX