Specifications

Graphic Operation Terminal GOT-F900 USER SCREEN MODE 7
7-28
"Project Auxiliary Settings" dialog box
Setting: "Defined key action"
- When selecting "No Movement"
Even if the "ENT" key is pressed after a numeric value is entered using the ten-keys, the
cursor is not moved or deleted.
- When selecting "User ID order"
When the "ENT" key is pressed after a numeric value is entered using the ten-keys, the
cursor is moved in the movement destination ID order set to each target object. (Set the
movement destination ID on the "Numerical Input" or "Ascii Input" setting window.)
- When selecting "Clear cursor and key window"
When the "ENT" key is pressed after a numeric value is entered using the ten-keys, the
cursor is deleted.
When performing the data change operation again, press the "SET" key to display the
cursor again. At this time, the cursor is displayed again in a target object located in the
upper left position.
- In the F920GOT-K, the cursor is cleared when the "ESC" key is pressed. In other models
than the F920GOT-K, the cursor moves as defined under Cursor Movement in the
Screen Auxiliary Setting dialog box when the "ESC" key is pressed.
Setting