Specifications

Graphic Operation Terminal GOT-F900 USER SCREEN MODE 7
7-25
Setting: "Action when switching screens" in "Key window/Cursor display setting"
- When selecting "Don't display cursor and key window"
When the screen is changed over, the cursor and the key window are not displayed.
When entering a numeric value, press the "SET" key to display the cursor.
- When selecting "Display cursor only"
When the screen is changed over, the cursor is displayed in "Numerical Input" or "Ascii
Input" satisfying the operation condition and located in the most upper left position.
(When entering a numeric value, pressing the "SET" key to display the cursor is not
required.)
- When selecting "Display cursor and key window"
When the screen is changed over, the cursor is displayed in "Numerical Input" or "Ascii
Input" satisfying the operation condition and located in the upper left position. (When
inputting a numeric value, pressing of the "SET" key to display the cursor is not
required.)
In addition, the key window is displayed, and the data can be changed using the touch
keys.
Setting
("Key window" tab)
Decimal Hexadecimal ASCII
When selecting "Use
default key window"
Only the cursor is
displayed.
Only the cursor is
displayed.
Only the cursor is
displayed.
When specified key
window does not exist
Only the cursor is
displayed.
The cursor and the key
window held by the
system are displayed.
The cursor and the key
window held by the
system are displayed.
When selecting
number 0 under
"Select key window
sheet No."
Only the cursor is
displayed.
Only the cursor is
displayed.
Only the cursor is
displayed.
When key window is
created and its
number is selected
under "Select key
window sheet No."
The cursor and the set
key window are
displayed.
The cursor and the set
key window are
displayed.
The cursor and the set
key window are
displayed.