Specifications

Graphic Operation Terminal GOT-F900 USER SCREEN MODE 7
7-16
7.6.4 Decimal point input function
Decimal points can be entered if a touch key to which the key code for decimal point (002E) is
assigned is included when data change is performed.
Applicable version
GOT
Screen creation software
* Decimal points cannot be entered in a key window displayed in the standard form.
It is necessary to create a key window using the key window customizing function (refer to
7.5.4) or display a keyboard including a touch key for decimal point on the screen.
• Display example of numeric input: Display device D100, signed decimal number
* "1230" is entered into the PLC (D100) whether a decimal point exists or not.
Note: Decimal point input does not mean changing the display position of a decimal point
arbitrarily.
The set number of digits to display and number of digits after a decimal point cannot be
exceeded when entering numbers.
Product model name Version
F930GOT, F933GOT V4.00 or later
F930GOT-K From first product
F940GOT, F943GOT V6.00 or later
F940WGOT V1.00 or later
Software name Applicable version
GT Designer SW1D5C-GOTR-PACKE(A) or later
FX-PCS-DU/WIN-E V2.00 or later
D100
12345 = 1 2 3 . 4 5
Number of digits to display: 6 digits (including a decimal point)
Number of digits after a decimal point: 2 digits
When changing to 12.30
With a touch switch for decimal
point
Enter [ 1 ] [ 2 ] [ . ] [ 3 ].
Without a touch switch for
decimal point
Enter [ 1 ] [ 2 ] [ 3 ] [ 0 ].