Specifications

Graphic Operation Terminal GOT-F900 USER SCREEN MODE 7
7-13
7.6.3 Key window display in F930GOT-K
When using FX-PCS-DU/WIN:
The key window is displayed when a number or character on the screen is touched.
An object for data change can be allocated to a touch key or function key, and a key window
can be displayed.
When using GT Designer:
When displaying the key window in the F930GOT-K, set the keys using "Screen" and
"Project" available by selection of "Common"
→
"Auxiliary Setting" from the menu bar in the
screen creation software (GT Designer).
When deleting the displayed ten-keys, set the "Project Auxiliary Settings" dialog box.
"Project Auxiliary Settings" dialog box
• When displaying the key window at screen changeover
Setting: "Action when switching screens" in "Key window/Cursor display setting"
Select "Display cursor and key window".
At screen changeover, the cursor is displayed in "Numerical Input" or "Ascii Input"
satisfying the operation condition and located in the most upper left position.
In addition, the key window is displayed, and the data can be changed using the touch
keys.
The displayed key window varies depending on the setting on the "Key window" tab on
the "Display cursor and key window" dialog box.
Setting
("Key window" tab)
Decimal Hexadecimal ASCII
When selecting "Use
default key window"
Only the cursor is
displayed.
Only the cursor is
displayed.
Only the cursor is
displayed.
When specified key
window does not exist
Only the cursor is
displayed.
The cursor and the key
window held by the
system are displayed.
The cursor and the key
window held by the
system are displayed.
Setting