Specifications

Graphic Operation Terminal GOT-F900 USER SCREEN MODE 7
7-12
7.6.2 Data change procedure using touch key
[ When the keyboard is always displayed ]
Cursor
display
0
5
1
6
2
7
3
8
4
9 -
ENT
CLR
CURRENT
VALUE
5
OPERATION STATE MONITOR
4
678
123
[ When the keyboard is called ]
0
5
1
6
2
7
3
8
4
9
- ENT
CLR
Cursor
displa
y
CURRENT
VALUE
OPERATION STATE MONITOR
4123
• When a numeric or ASCII code displayed on the
screen is touched, a cursor is displayed and the
numeric or ASCII code can be changed using the
on screen keyboard.
When GT Designer is used, "Project" in "Auxiliary
Setting" in "Common" should have been set so that
the key window is open.
• Press the CLR key to cancel the input.
Press the ENT key to execute the input.
• When selecting another numeric or ASCII code,
touch it on the screen or select it using the and
keys.
• If the keyboard is not displayed on screen, when a
numeric or ASCII code touched, the ten-key
keypad is displayed as shown on the left so that
numerics can be entered.
• Specifying the keyboard design
FX-PCS-DU/WIN-E: Select ten keys to use on the
setting screen for "Data Setting" object.
GT Designer: After creating ten keys on the
window, select an window to be used for "Project"
in "Auxiliary Settings". (Refer to 19.1.)
• The ten-key window is initially fixed to display in
the lower hight. However, it can be moved by
touching the position where it should be next after
touching the upper part of the window.