Specifications

USER SCREEN MODE 7
7-1
7. USER SCREEN MODE
DANGER
• Incorrect operation of the touch key(s) may lead to a serious accident if the GOT
backlight has failed.
When the GOT backlight fails, the display section turns black and causes the monitor
screen to appear blank, while the input of the touch key(s) still remain active.
Hence, confusing an operator in thinking that the backlight OFF function on the GOT is
effective, then may try to display the screen again by touching the display section
causing touch key operation.
Note that the following occurs on the GOT when the backlight fails:
- The monitor screen disappears even when the backlight OFF function is not set.
- The monitor screen will not come back ON from touching the display section, even if
the backlight OFF function is set.
• Read the manual thoroughly and confirm the safety sufficiently before changing the data
or turning ON or OFF a bit device.
Otherwise, an erroneous operation may damage the machine or cause an accident.
This chapter describes the mode in which user screens are displayed.
Confirm the outline of what can be displayed and the operating procedures in USER SCREEN
MODE.
For contents related to the screen design, refer to Chapters 19 to 22.
Graphic Operation Terminal GOT-F900