Specifications

Graphic Operation Terminal GOT-F900 Creation of Display Screens 6
6-30
• Device assigned for System Information execute the following operations.
M10: When set to ON from OFF, clears the alarm histor
y
.
M11: When set to ON, extin
g
uishes the backli
g
ht of the
displa
y
screen after the specified time.
M16: When set to ON, sets to OFF the bit 5 of the write
device D
"
+4.
M12: When set to ON from OFF, clears the samplin
g
data
acquired in the samplin
g
mode.
The screen numbers of screens
currentl
y
displa
y
ed are stored in D20
to D22.
User screens numbers 1 to 500
and s
y
stem screens number 1000
and later are available.
When screen overla
y
is not
performed, "0" is stored in D21
and D22.
D20 to D22
D23 stores the ID number of an ob
j
ect.
M10
M11
M12
D20 to D22 store the screen
numbers of screens currentl
y
displa
y
ed.
3
4
5
D23 stores the ID number of a
manipulated ob
j
ect.
GOT PLC pro
g
ram
Read devices
Write devices
Alwa
y
s ON
K3M20D24MOV
M20 remains ON while an alarm device remains ON.
M21 remains ON while samplin
g
is performed.
M23 become ON when the backup batter
y
power of the GOT
has dropped.
M22 becomes ON when chan
g
e of numeric data is
completed.
M20
M21
M22
M23
ID
Read devices
Write devices
D10 (b0 to b2 are developed to M10 to M12.)
D11
D20 to D24 (b0 to b11 of D24 are developed to M20 to M31.)
:
:
D23
are assigned.
When the following devices are assigned
M15
M15: When set to ON, nullifies bar code inputs and clears
the data read b
y
the GOT while the bar code reader is
connected.
M24 remains ON while the
g
rip switch is pressed and held in
the hand
y
GOT
(
excludin
g
the robot hand
y
GOT
)
.
M24
M25 turns ON when the data read from the bar code reader is
stored in the PLC.
M25
M18: When set to ON, displa
y
s the ke
y
board for inputtin
g
the password when a screen at hi
g
her securit
y
level is
displa
y
ed. Alwa
y
s ON
K3M10
D10
MOV
D11K
&
MOV
M16
M18
M28
It becomes ON while chan
g
in
g
of numeric or ASCII data is
performed.
D11 specifies the recipe number.
Write to D11 a recipe number whose data is to be read or
written subtracted b
y
"1".
D24
(
In the pro
g
ram example on the ri
g
ht, b0 to b11 are
developed to M20 to M31.
)