Operation Manual

−49−−48−
■
Operation method of various setting
1.
Tap the [Check of RC setting] on the menu screen.
2.
If multiple heat pump units are connected to the remote
control, a list of all heat pump unit connected. Tap the
HP unit to be displayed.
On the [Select heat pump unit] screen, up to 8 units are
displayed. If 9 or more units are connected, when tapping
Next
button, the 9th and the subsequent units are displayed.
3.
Since the current setting contents are displayed, the
final check of settings can be done.
Displayed item
No. Item Set range
1 Operation mode Run/Stop/Pause
2 Hot water temp From 60°C to 90°C
3 — Out of USE
4 Storage tank Type Unvented/Open
5 % Target HW amount From 10% to 100%
6 HW amount setting Usual/More/Less
7 Peak-cut % 0, 40, 60, 80%
8 Peak-cut setting Valid/Invalid
9 Period of time off Valid/Invalid
10 Specific day off Valid/Invalid
11 Defrosting operation Display/Hide
12 Status of HW amount Display/Hide
13 Night tariff start
From 00:00 up to 23:50
14 Night tariff end From 00:00 up to 23:50
15 Next service date Day/Month/Year
How to check the remote control setting
A setting list for the current setting of remote control and heat pump unit can be checked.