Operation Manual

−45−−44−
■
Operation method of various setting
3.
Set the name of HP unit to be added to the
HP unit No.
button.
Tap the
HP unit No. button to which the name is set.
When the letter selection screen is displayed same as at
the setting of the name of RC (
☞
Go to 2), enter letters.
The name of HP unit can be entered up to 4 2-byte
(8 1-byte9 letters.
When the input is over, tap
Set button.
4.
Set the message of [In operation for defrosting] to be
displayed or not.
When the operating conditions is to start frosting on the
HP unit during its operation, it is controlled to operate
defrosting automatically.
Display… During defrosting operation, the message of
[In operation for defrosting] is displayed.
Hide … The message of [In operation for defrosting] is
not displayed.