Operation Manual

−42−
1.
Tap the [Administrator settings] on the main menu
screen.
Since Administrator [Input password] screen is displayed
enter the Administrator password (
☞
Go to Page 38)
How to set Administrator settings
1.
When tapping the [Enable/Disable setting] on the
[Admininstrator settings] menu screen, the [Enable/
Disable setting] menu is displayed.
Select the following operation items from this menu, and
setting of [Operation permission] or [Operation prohibition]
is available.
If setting [Permission], operation is available.
If setting [Prohibition], the message of [Operation is
invalid] is displayed for 3sec, when operating.
Depending on the operation item, [Administrator
password] is required.
■
The behavior at prohibition setting
①
Run/Pause … Prohibit Run/Pause operation
②
Change set temp …
Request to enter administrator password at setting change
③
Change amount to top up … Request to enter administrator password at setting change
④
Manual operation to fill up … Prohibit to start manual opeartion to fill up
⑤
Setting of schedule …
Request to enter administrator password at setting change
2.
Tap [Permission] or [Prohibition] on each operation item.
■
How to set limited operation
2.
Since the [Administrator settings] menu screen is
displayed, please tap your desired item.
①
Enable/Disable setting … Go to page 42
②
Night tariff setting … Go to page 43
③
HP unit selection … Go to page 43
④
RC display setting … Go to page 44
⑤
Step size of HW temp … Go to page 47
⑥
Change administrator password
… Go to page 47
⑦
User Environment … Go to page 48