Operation Manual

−31−−30−
10.
Set the [Peak-cut %].
Set the [Peak-cut %] by tapping
▲ ▼
buttons.
The [Peak-cut %] can be set at 10%, 40%, 60% and 80%.
After setting the [Peak-cut %], tap Set button.
(
☞
Go to 11)
14.
[All set contents acknowledge] screen is displayed
Tap
Ye s and save the setting
After saving, it returns to the [Day selection] screen
15.
If the setting is done by changing the day, please start
setting from 4.
13.
The [Checking of setting contents] on the day is
displayed. (
☞
Go to 6)
When saving the setting, tap
Set button.
①
In case of setting all

It shifts to the [All set contents acknowledge] screen
(
☞
Go to 14)
②
In case of individual setting

Save the setting and shift to the [Day selection]
screen (
☞
Go to 4)
11.
The [Checking of set contents] screen is displayed
(
☞
Go to 7 )
When tapping
Set button, the set contents are
confirmed and [Checking of set contents on the day]
screen is displayed. (
☞
Go to 6)
12.
If changing or adding the setting contents on the same
day continuously, please start the work from 6.