Operation Manual

−23−−22−
Schedule setting
The operation schedule of the heat pump unit can be set.
The setting of target HW amount at each time zone, the setting of day off and setting of peak-cut can be set.
1.
Push the Schedule setting switch on the panel.
2.
The menu screen of [Setting of schedule] is displayed.
The summary of each menu item is as follows
①
Setting of weekly operation pattern (
☞
To 3)
②
Setting of day off (
☞
To 4)
③
Setting of peak-cut (
☞
To 5)
④
Checking of operation pattern (
☞
To 6)
3.
Setting of weekly operation pattern (See page 24 for detail)
The target HW amount at each time zone for each day can be set.
The operation pattern can easily be set from the setting of User environment (
☞
Page 48)
4.
Setting of day off (See page 27 for detail)
By setting day off, the heat pump unit operation to top up can be invalid on the day set day off.
It is available to set day off
①
Every week
②
Specific period of time
③
Specific day.
5.
Setting of peak-cut (See page 29 for detail)
By limiting the maximum capacity of the heat pump unit, the power consumption can be reduced.
It is available to set on weekly basis.
6.
Checking of operation pattern (See page 32 for detail)
The current operation pattern can be checked.