User`s manual

6 - 31 6 - 31

6. HOW TO COMMUNICATE WITH ID TAGS

6.4.4 Set bit

The Set Bit program is a program for setting the specified bits of the data of an ID tag

to “1”.

(1) Program conditions

(a) Setting contents

Intelligent Function

Module Device

Address

Buffer Memory Name Setting Contents

Command code specification

area (CH1)

H2 (Set bit)

Head address specification

area (CH1)

K10 (Address: 10)

Number of processed points

specification area (CH1)

K4 (4 bytes)

(b) Devices used by user

1. External inputs (commands/data)

Device Application

M1030 Set Bit of ID Tag command

M1031 Set Bit of ID Tag result reception

M1032 Cancel Set Bit of ID Tag command

D3400 to D3401 Specifies the data of the ID Tag for which bits are to be set.

2. External outputs (verification)

Device Application

M1033 Normal completion during Set Bit of ID Tag

M1034 Module error during Set Bit of ID Tag

M1035 ID communication complete during Set Bit of ID Tag

D1030 Error details storage during Set Bit of ID Tag