User`s manual

6 - 82 6 - 82
6. HOW TO COMMUNICATE WITH ID TAGS
(d) Write ID Tag
M1170 X1000 X1002 X1003
MOVP D0H1
MOVP D1H0
MOVP D2H0
MOVP D3K10
MOVP D4K8
K0
Y1014SET
M1174
D0 M1172K5K1 K0H0K1ZP.REMTO "J1"K0
X1000 X1005
D1200 M1176K1K1 K41H0K1ZP.REMFR "J1"
M1172
K1
D1100 M1174K4K1 K100H0K1ZP.REMTO "J1"K1
M1173
M1175
X1004 X1005
X1174
X1176
M3000RST
Reset the device during
the ch1 use of the
dedicated instructions.
X1172
M3000
M3000SET
M3000
M3000SET
K0
K0
M3000SET
M3000
Set command code
specification in Write.
Set communication
specification in trigger.
Set data storage order in
a higher → lower.
Set top address to retrieve
from an ID tag in K10.
Set the reading size from
an ID tag to 8 bytes.
Set an ID command execution
request switch.
Write the setting data to
write to the buffer memory
of the RFID module of
remote I/O station.
Read the error code from
the buffer memory of the
RFID module of remote
I/O station.
Set the device during the
ch1 use of the dedicated
instructions.
Write
Setting
Set the device during the
ch1 use of the dedicated
instructions.
Set the device during the
ch1 use of the dedicated
instructions.
Write the ID tag data to
write to the buffer memory
of the RFID module of
remote I/O station.