User`s manual

6 - 77 6 - 77
6. HOW TO COMMUNICATE WITH ID TAGS
(2) Network parameters
The network parameters to set to a CPU module of the remote I/O master station
are as follows.
Unit 1
Network type MNET/H
（
Remote master
）
Starting I/O No.
0000
H
Network No. 1
Total stations 1
Mode Online
(3) Network range assignment
The network range assignment of the network parameter to set to a CPU module of
the remote I/O master station, are as follows.
M station -> R station M station <- R station
Y Y X X
Station
No.
Points Start End Points Start End Points Start End Points Start End
1 96 1000 105F 96 0000 005F 96 1000 105F 96 0000 005F
(4) Refresh parameters
The refresh parameters of the network parameter to set to a CPU module of the
remote I/O master station are as follows.
Link side PLC side
Dev. name Points Start End Dev. name Points Start End
Transfer SB SB 512 0000 01FF
⇔
SB 512 0000 01FF
Transfer SW SW 512 0000 01FF
⇔
SW 512 0000 01FF
Random cyclic LB
⇔
Random cyclic LW
⇔
Transfer 1 LB 8192 0000 1FFF
⇔
B 8192 0000 1FFF
Transfer 2 LW 8192 0000 1FFF
⇔
W 8192 0000 1FFF
Transfer 3 LX 96 1000 105F
⇔
X 96 1000 105F
Transfer 4 LY 96 1000 105F
⇔
Y 96 1000 105F
Items are set in GX Developer.
Items are set in GX Developer.
Items are set in GX Developer.