User`s manual
2 - 1 2 - 1
2. SYSTEM CONFIGURATION
Chapter 2 SYSTEM CONFIGURATION
The following describes the system configuration of the RFID interface module.
2.1 Application System
The following describes the application system.
(1) Mountable modules, mountable quantities, and mountable base units
(a) When mounted with a CPU module
The table below indicates the mountable CPU modules, mountable quantities,
and mountable base units for the RFID interface module.
Note that, depending on the combination with other mounted modules and the
number of modules mounted, the power supply capacity may be insufficient.
When mounting the modules, be sure to take the power supply capacity into
consideration.
In the event the power supply capacity is insufficient, investigate the combination
of the mounted modules.
Table 2.1 Application system
Mountable CPU Module Mountable Base Unit*
2
CPU Type CPU Model
Mountable Quantity*
1
Main Base Unit Extension Base Unit
Q00JCPU 8, maximum
Q00CPU
Basic model
QCPU
Q01CPU
24, maximum
○ ○
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
High
performance
model QCPU
Q25HCPU
64, maximum
○ ○
Q02PHCPU
Q06PHCPU
Q12PHCPU
Process CPU
Q25PHCPU
64, maximum
○ ○
Q12PRHCPU
Dual CPU
Q25PRHCPU
53, maximum
× ○
Q00UJCPU 8, maximum
Q00UCPU
Q01UCPU
24, maximum
Q02UCPU 36, maximum
Q03UDCPU
Q04UDHCPU
Q06UDHCPU
Q10UDHCPU
Q13UDHCPU
Q20UDHCPU
Programmable
controller CPU
Universal
model CPU
Q26UDHCPU
64, maximum
○ ○
2