User`s manual

6 - 59 6 - 59
6. HOW TO COMMUNICATE WITH ID TAGS
6.4.13 Write with error correction
The Write with Error Correction program is a program for writing data and data
reliability inspection check code to an ID tag.
(1) Program conditions
(a) Setting contents
Intelligent Function
Module Device
Address
Buffer Memory Name Setting Contents
U0
\
G0
Command code specification
area (CH1)
HB (Write with Error Correction)
U0
\
G3
Head address specification
area (CH1)
K10 (Address: 10)
U0
\
G4
Number of processed points
specification area (CH1)
K8 (8 bytes)
(b) Devices used by user
1. External inputs (commands/data)
Device Application
M1120 Write with Error Correction of ID Tag command
M1121 Write with Error Correction of ID Tag result reception
M1122 Cancel Write with Error Correction of ID Tag command
D2300 to D2303
Specifies data to be written to ID tag during Write with Error Correction
of ID Tag
2. External outputs (verification)
Device Application
M1123 Normal completion during Write with Error Correction of ID Tag
M1124 Module error during Write with Error Correction of ID Tag
M1125 ID communication complete during Write with Error Correction of ID Tag
D1120 Error details storage during Write with Error Correction of ID Tag