Specifications

6 - 19 6 - 19
6. HOW TO COMMUNICATE WITH ID TAGS
6.4.4 Program example with LCPU use
With the LCPU, the program example with QCPU use can be used. Execute setup in
accordance with the information in this section, and use the program example of
Section 6.4.3 (4).
Set the parameters using "PC Parameters" and "Network Parameters" of GX Works2.
(1) Parameter settings
(a) Setting the PC parameters
Change the settings of the start XY of the built-in I/O functions in accordance
with the program example with QCPU use. Set the values to the start XY not
used by the system from "I/O Assignment Settings" of "PC Parameters". The
following shows an example of "I/O Assignment Settings" with L02CPU use.