Specifications

6 - 16 6 - 16
6. HOW TO COMMUNICATE WITH ID TAGS
(3) List of devices used in program examples
Table 6.7 List of Devices Used in Program Examples (with QCPU (Q Mode) Use)
Device Description
Master module
X0 Module error
X1 Host data link status
XF Module READY
I/O (64 input points)
X22 Signal input when initial settings are changed
X30 Signal input when reading from ID tag
X40 Signal input when writing to ID tag
I/O (64 output points)
Y60 Signal output when data link error occurs
RFID module
X1002 ID communication complete
X1003 ID-BUSY
X1004 ID command complete
X1005 Error detection
X1078 Initial data processing request flag
X1079 Initial data setting complete flag
X107B Remote READY
Y1004 ID command execution request
Y1078 Initial data processing complete flag
Y1079 Initial data setting request flag
M0 Internal relay where ECL2-V680D1 data link status is stored
0 (OFF): Data link normal
1 (ON): Data link error
M30 Internal relay turned ON when ID command is executed (Read)
M40 Internal relay turned ON when ID command is executed (Write)
M90 Internal relay turned ON when initialization procedure registration is instructed
M100 Master control (MC) contact
D500 to D512 Source data written to ID tag
D600 to D612 Data read from ID tag
D700 Error details stored value
D1000 Communication specification area / Command code specification area
D1001 Communication setting area / Start address specification area
D1002 Processing specification area / Number of processing points specification area
D1003 Auto system command wait time setting area / Write data specification area 1
D1004 Write data specification area 2
to to
D1015 Write data specification area 13
D1100 Module status storage area
D1101 Error details storage area
D1103 Read data storage area 1
D1104 Read data storage area 2
to to
D1115 Read data storage area 13
SW80 Other station data link status
SB0D Remote device station initialization procedure registration instruction
SB5E Execution status of remote device station initialization procedure
SB5F Completion status of remote device station initialization procedure