Specifications

6 - 12 6 - 12
6. HOW TO COMMUNICATE WITH ID TAGS
(c) For FXCPU
M115 to M100
M131 to M116
to
M227 to M212
CPU module
RX00 toRX0F
RX10 to RX1F
to
RX70 toRX7F
Remote input (RX)BFM No.
Master module
RX00 to RX0F
RX10 to RX1F
to
RX70 to RX7F
Remote input (RX)
ECL2-V680D1
(Station No. 1)
E0H
E1H
to
E7H
RY00 to RY0F
RY10 to RY1F
to
RY70 to RY7F
Remote output (RY)
160H
161H
to
167H
RY00 to RY0F
RY10 to RY1F
to
RY70 to RY7F
Remote output (RY)
Device D
D200
D201
to
D215
Device D
D100
D101
to
D115
RWw0
RWw1
to
RWwF
Remote register (RWw)
1E0H
1E1H
to
1EFH
RWr0
RWr1
to
RWrF
Remote register (RWr)
2E0H
2E1H
to
2EFH
RWw0
RWw1
to
RWwF
Remote register (RWw)
RWr0
RWr1
to
RWrF
Remote register (RWr)
M315 to M300
M331 to M316
to
M427 to M412
Device M
Device M
FROM
instruction
TO
instruction
TO
instruction
FROM
instruction
Point
Depending on the CPU module used, certain devices used in the program examples in this
section may not be applicable.
For the device configurable range, refer to the user's manual of the CPU module used.
For example, in the case of A1SCPU, X100, Y100 and devices thereafter cannot be used.
Use devices such as B (Link relay) and M (Internal relay).
(4) Initial setting details
Table 6.3 Initial Setting Details
Setting Item Description
Set
Value
Communication specification (RWw0) Trigger 0
Communication setting (RWw1) Write verify setting: Execute
ID tag communication speed setting: Standard mode
Write protect setting: Enable
Read/Write data code setting: Without ASCII/HEX conversion
0
Processing specification (RWw2) Data storage order: Upper → Lower 0
Auto system command wait time setting
(RWw3)
Continually executes the ID command until there is a response
from the ID tag.
0