Specifications

6 - 10 6 - 10
6. HOW TO COMMUNICATE WITH ID TAGS
6.4.2 Program example conditions
The program examples shown in this section were created under the conditions
indicated in the figure below.
(1) ECL2-V680D1 usage conditions
Mode switch setting: 0 (Ver. 1 compatible, 4 occupied stations)
Station number setting switch: 1
Transmission speed setting switch: 0 (156kbps)
*1. For LCPU, set the transmission speed in network parameters.
(2) System configuration
(3) Remote I/O signal and remote register assignment related
(a) For QCPU (mode Q), LCPU, and QnACPU
ECL2-V680D1 (Station No. 1)
Terminating
resistor
X22 pushbutton switch
X30 pushbutton switch
X40 pushbutton switch
Y60 lamp
終端抵抗
Master station
CPU module
Master module (X0 to X1F / Y0 to Y1F)
I/O (input: 64 points) (X20 to X5F)
I/O (output: 64 points) (Y60 to Y9F)
Terminating
resistor