Specifications

4 - 4 4 - 4
4. SETUP AND PROCEDURES PRIOR TO OPERATION
4.3.4 Installing the module to a DIN rail
Point
The following describes an example of how to use DIN rail brackets.
Secure the module in accordance with the manual of the DIN rail brackets used.
(1) Installation procedure
The following describes the procedure for installing the RFID interface module to a
DIN rail.
1. Attach the tabs on the upper side of the module to the upper
side of the DIN rail.
2. Press the module inward until the hooks for installing the module
to the DIN rail make a "click" sound.
3. Loosen the screw of the DIN rail bracket.
Attach the tab to the
bottom of the DIN rail.
4. Attach the lower tab of the DIN rail bracket to the lower side of
the DIN rail. Align the top and bottom while checking the arrows
located on the front of the DIN rail bracket.
Attach the tab to the
top of the DIN rail.
5. Attach the upper tab of the DIN rail bracket to the upper side of
the DIN rail.
DIN rail bracket
6. Slide the DIN rail bracket to the left end of the module.