Specifications

3 - 16 3 - 16
3. SPECIFICATIONS
(3) Processing specification area (RWwm+2H)
The processing specification area selects the data storage order when reading or
writing is performed with an ID tag.
Table 3.14 Processing Specification Area
Name
Specification
Description
*5
Processing
Description
*1*2
Applicable Commands
Data storage order
0000
H
Upper → Lower
*3
Read, Write, Fill Data
0001
H
Lower → Upper
*4
*1. The set contents are enabled when the initial data setting request flag (RY (n+k) 9) turns ON.
*2. The default setting is Upper → Lower.
*3. The following shows an Upper → Lower example.
*4. The following shows a Lower → Upper example.
*5. If an out-of-range value is specified, error detection (RXn5) turns ON. The set contents are
not updated.