Specifications

2 - 1 2 - 1
2. SYSTEM CONFIGURATION
Chapter 2 SYSTEM CONFIGURATION
The following describes the system configuration of the RFID interface module.
2.1 Application System
The following describes the application system.
(1) Applicable combinations
The following master module, GX Works2 network parameter mode setting / station
information (station type), and module mode switch setting combinations can be
used.
Table 2.1 Application System
○: Applicable ×: Not applicable
Master Module
GX Works2 Network Parameter Setting RFID Interface Module Mode Switch Setting
*1
Mode Setting
Station Information
(Station Type)
0, 4
(Version 1 Remote
Device Station)
(Version 1 Compatible
Slave Station)
5, 6, 7
(Version 2 Remote
Device Station)
(Version 2 Compatible
Slave Station)
QJ61BT11
AJ61BT11
A1SJ61BT11
AJ61QBT11
A1SJ61QBT11
Remote net Ver.1
mode
Remote device station
○ ×
QJ61BT11N
L26CPU-BT
LJ61BT11
FX3U-16CCL-M
ECP-CL2BD
Q81BD-J61BT11
Q80BD-J61BT11N
Remote net Ver.1
mode
Remote device station
○ ×
Remote net Ver.2
mode
Version 1 remote
device station
○ ×
Version 1 remote
device station
× ○
Remote net additional
mode
Version 1 remote
device station
○
*2
×
Version 1 remote
device station
× ○
*3
*1. For details, refer to Section 4.5.
*2. If there is a station number that is used as a version 2 remote device station
in the existing system, set the station number of the version 1 remote
device station to be added before this station.
*3. Set the station number of the version 2 remote device station to be added
after the station number used in the existing system.
2