Electric Heat Kit Installation Manual
Table Of Contents
- Electric Heat Kit
- Table of Contents
- CHECK LIST AFTER INSTALLATION
- Dimensions
- 1. Electric Heat Kit Models
- 2. Electric Heat Kit Accessories
- 3. Safety precautions
- 4. Installing the Electric Heat Kit
- 4.1 Read the safety precautions section of the Multi-Position Air Handler before installing the electric heat option.
- 4.2 Setting proper external static pressure.
- 4.3 Enabling Electric Heat
- 4.4 Operation Mode
- 4.5 Attaching the enclosure to the Air Handler
- 4.6 Proper Support in the Horizontal Position for the Multi-Position Air Handler with Electric Heat Kit:
- 4.7 Rotating circuit breaker orientation for Horizontal Left Installations:
- 5. Electrical Schematics
2. Electric Heat Kit Accessories
2.1. Separate Power Kit [PVA-A·AA4(7), MVZ-A·AA4(7) and SVZ-KP-NA
models]
Part Number: SPTB1 This kit allows the installer to connect power from another source to the air handler
NOTE
S2 & S3 still must come from outdoor unit for communication
2.2. Auxiliary Heat Lockout [PV
A-A·AA4(7), MVZ-A·AA4(7) and SVZ-KP-NA
models]
Part Number: ETC-211000-MIT
This option prevents the electric heat kit from operating above a set outside temperature.
Electric Heat Kit
Specifications are subject to change without notice. 8 © 2018 Mitsubishi Electric US, Inc.