Electric Heat Kit Installation Manual
Table Of Contents
- Electric Heat Kit
- Table of Contents
- CHECK LIST AFTER INSTALLATION
- Dimensions
- 1. Electric Heat Kit Models
- 2. Electric Heat Kit Accessories
- 3. Safety precautions
- 4. Installing the Electric Heat Kit
- 4.1 Read the safety precautions section of the Multi-Position Air Handler before installing the electric heat option.
- 4.2 Setting proper external static pressure.
- 4.3 Enabling Electric Heat
- 4.4 Operation Mode
- 4.5 Attaching the enclosure to the Air Handler
- 4.6 Proper Support in the Horizontal Position for the Multi-Position Air Handler with Electric Heat Kit:
- 4.7 Rotating circuit breaker orientation for Horizontal Left Installations:
- 5. Electrical Schematics
CN24-1
CN24-2
15 & 17.5 kW
PVA Multi Position
SPTB1 - Separate Power Terminal Block
Electric Heat Model:
EH15-MPA-L(B)
EH17-MPA-L(B)
2 stage; 15 or 17.5kW
NOTE
Use copper or aluminum conductors only
UTILISER DES FILS D’ALIMENTATION EN CUIVRE/
ALUMINUM
— - - — - - — Field Supplied Wiring
Electric Heater Module installed directly on of top of air
handler
Electric Heat Kit
Specifications are subject to change without notice. 36 © 2018 Mitsubishi Electric US, Inc.