Electric Heat Kit Installation Manual
Table Of Contents
- Electric Heat Kit
- Table of Contents
- CHECK LIST AFTER INSTALLATION
- Dimensions
- 1. Electric Heat Kit Models
- 2. Electric Heat Kit Accessories
- 3. Safety precautions
- 4. Installing the Electric Heat Kit
- 4.1 Read the safety precautions section of the Multi-Position Air Handler before installing the electric heat option.
- 4.2 Setting proper external static pressure.
- 4.3 Enabling Electric Heat
- 4.4 Operation Mode
- 4.5 Attaching the enclosure to the Air Handler
- 4.6 Proper Support in the Horizontal Position for the Multi-Position Air Handler with Electric Heat Kit:
- 4.7 Rotating circuit breaker orientation for Horizontal Left Installations:
- 5. Electrical Schematics
4.5.L.
For electric heat kits with two circuit breakers, follow the instructions below: Install the foam insulation provided
in the electric heater according to the position of the circuit breakers. For Vertical, horizontal right and downflow
positions, install the foam insulation piece shown below in the first image. For Horizontal left installations, see the
second image. For Horizontal left installations, the circuit breaker must be rotated 180°, see section 4.7 for “Rotating
circuit breaker orientation for Horizontal Left installations”.
VERTICAL, HORIZONTAL RIGHT AND DOWNFLOW
INSTALLATIONS
HORIZONTAL LEFT INSTALLATIONS
HORIZONTAL LEFT INSTALLATIONS
VERTICAL, HORIZONTAL RIGHT AND DOWNFLOW
INSTALLATIONS
Electric Heat Kit
Specifications are subject to change without notice. 25 © 2018 Mitsubishi Electric US, Inc.