Electric Heat Kit Installation Manual
Table Of Contents
- Electric Heat Kit
- Table of Contents
- CHECK LIST AFTER INSTALLATION
- Dimensions
- 1. Electric Heat Kit Models
- 2. Electric Heat Kit Accessories
- 3. Safety precautions
- 4. Installing the Electric Heat Kit
- 4.1 Read the safety precautions section of the Multi-Position Air Handler before installing the electric heat option.
- 4.2 Setting proper external static pressure.
- 4.3 Enabling Electric Heat
- 4.4 Operation Mode
- 4.5 Attaching the enclosure to the Air Handler
- 4.6 Proper Support in the Horizontal Position for the Multi-Position Air Handler with Electric Heat Kit:
- 4.7 Rotating circuit breaker orientation for Horizontal Left Installations:
- 5. Electrical Schematics
4.5.G.
From the back of the enclosure, install the (2) brackets which are included in the accessory bag. The four
screws shown can be loosened on the Heater Enclosure and Air Handler. Slide the brackets on to the loosened
screws and retighten the screws.
Installed Brackets
Installed Brackets
Electric Heat Kit
Specifications are subject to change without notice. 21 © 2018 Mitsubishi Electric US, Inc.