Electric Heat Kit Installation Manual
Table Of Contents
- Electric Heat Kit
- Table of Contents
- CHECK LIST AFTER INSTALLATION
- Dimensions
- 1. Electric Heat Kit Models
- 2. Electric Heat Kit Accessories
- 3. Safety precautions
- 4. Installing the Electric Heat Kit
- 4.1 Read the safety precautions section of the Multi-Position Air Handler before installing the electric heat option.
- 4.2 Setting proper external static pressure.
- 4.3 Enabling Electric Heat
- 4.4 Operation Mode
- 4.5 Attaching the enclosure to the Air Handler
- 4.6 Proper Support in the Horizontal Position for the Multi-Position Air Handler with Electric Heat Kit:
- 4.7 Rotating circuit breaker orientation for Horizontal Left Installations:
- 5. Electrical Schematics
4.5.E. Position the enclosure on top of the Air Handler so that the rear flange is inserted into the gap explained in step
4.5.D. Next, slide the heater enclosure back so that it is flush with the rear of the air handler
. The Angled Tab on the
Electric Heat Enclosure slides under the air handler’s rear flange on the supply side.
PVFY/PVA/MVZ
SVZ
Heater Enclosure will be
cabinet
4.5.F. Next, install the (2) M5 silver screws which are included in the accessory bag. This secures the electric heat
enclosure to the air handler
.
SVZ
PVFY/PVA/MVZ
Electric Heat Kit
Specifications are subject to change without notice. 20 © 2018 Mitsubishi Electric US, Inc.